Mikrotik Dual WAN with Redundancy

Mikrotik Dual WAN with AUTO Failover using ETH5 as the main and ETH4 as the Failover.
/interface bridge
add admin-mac=CC:2D:E0:E7:0A:40 auto-mac=no comment=defconf name=bridge
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=20/40mhz-XX disabled=no \
distance=indoors frequency=auto installation=indoor mode=ap-bridge ssid=MikroTik-E70A46 \
wireless-protocol=802.11
set [ find default-name=wlan2 ] band=5ghz-a/n/ac channel-width=20/40/80mhz-XXXX disabled=no \
distance=indoors frequency=auto installation=indoor mode=ap-bridge ssid=MikroTik-E70A45 \
wireless-protocol=802.11
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip pool
add name=default-dhcp ranges=192.168.144.10-192.168.144.254
/ip dhcp-server
add address-pool=default-dhcp interface=bridge name=server1
/interface bridge port
add bridge=bridge comment=defconf interface=ether2
add bridge=bridge comment=defconf interface=ether3
add bridge=bridge comment=defconf interface=sfp1
add bridge=bridge comment=defconf interface=wlan1
add bridge=bridge comment=defconf interface=wlan2
add bridge=bridge interface=ether1
/ip neighbor discovery-settings
set discover-interface-list=LAN
/interface list member
add comment=defconf interface=bridge list=LAN
add comment=defconf interface=ether5 list=WAN
add comment=defconf interface=ether4 list=WAN
/ip address
add address=192.168.144.1/24 interface=bridge network=192.168.144.0
/ip dhcp-client
add comment=defconf interface=ether4
add comment=defconf interface=ether5
/ip dhcp-server network
add address=192.168.144.0/24 comment=defconf dns-server=192.168.144.1 gateway=192.168.144.1
/ip dns
set allow-remote-requests=yes
/ip dns static
add address=192.168.88.1 comment=defconf name=router.lan
/ip firewall filter
add action=accept chain=input comment="defconf: accept established,related,untracked" \
connection-state=established,related,untracked
add action=drop chain=input comment="defconf: drop invalid" connection-state=invalid
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
add action=accept chain=input comment="defconf: accept to local loopback (for CAPsMAN)" \
dst-address=127.0.0.1
add action=drop chain=input comment="defconf: drop all not coming from LAN" in-interface-list=\
!LAN
add action=accept chain=forward comment="defconf: accept in ipsec policy" ipsec-policy=\
in,ipsec
add action=accept chain=forward comment="defconf: accept out ipsec policy" ipsec-policy=\
out,ipsec
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" connection-state=\
established,related hw-offload=yes
add action=accept chain=forward comment="defconf: accept established,related, untracked" \
connection-state=established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" connection-state=invalid
add action=drop chain=forward comment="defconf: drop all from WAN not DSTNATed" \
connection-nat-state=!dstnat connection-state=new in-interface-list=WAN
/ip firewall nat
add action=masquerade chain=srcnat out-interface=ether5
add action=masquerade chain=srcnat out-interface=ether4
/ip route
add comment="Check gateway Route 1" disabled=no distance=1 dst-address=8.8.8.8/32 gateway=\
192.168.1.1 routing-table=main scope=10 suppress-hw-offload=no target-scope=10
add comment="Check gateway Route 2" disabled=no distance=1 dst-address=8.8.4.4/32 gateway=\
192.168.0.1 routing-table=main scope=10 suppress-hw-offload=no target-scope=10
add check-gateway=ping comment="Route1 Main Default Route" disabled=no distance=1 dst-address=\
0.0.0.0/0 gateway=8.8.8.8 pref-src=0.0.0.0 routing-table=main scope=30 \
suppress-hw-offload=no target-scope=11
add check-gateway=ping comment="Route2 Backup Route" disabled=no distance=2 dst-address=\
0.0.0.0/0 gateway=8.8.4.4 pref-src=0.0.0.0 routing-table=main scope=30 \
suppress-hw-offload=no target-scope=11
/ipv6 firewall address-list
add address=::/128 comment="defconf: unspecified address" list=bad_ipv6
add address=::1/128 comment="defconf: lo" list=bad_ipv6
add address=fec0::/10 comment="defconf: site-local" list=bad_ipv6
add address=::ffff:0.0.0.0/96 comment="defconf: ipv4-mapped" list=bad_ipv6
add address=::/96 comment="defconf: ipv4 compat" list=bad_ipv6
add address=100::/64 comment="defconf: discard only " list=bad_ipv6
add address=2001:db8::/32 comment="defconf: documentation" list=bad_ipv6
add address=2001:10::/28 comment="defconf: ORCHID" list=bad_ipv6
add address=3ffe::/16 comment="defconf: 6bone" list=bad_ipv6
/ipv6 firewall filter
add action=accept chain=input comment="defconf: accept established,related,untracked" \
connection-state=established,related,untracked
add action=drop chain=input comment="defconf: drop invalid" connection-state=invalid
add action=accept chain=input comment="defconf: accept ICMPv6" protocol=icmpv6
add action=accept chain=input comment="defconf: accept UDP traceroute" port=33434-33534 \
protocol=udp
add action=accept chain=input comment="defconf: accept DHCPv6-Client prefix delegation." \
dst-port=546 protocol=udp src-address=fe80::/10
add action=accept chain=input comment="defconf: accept IKE" dst-port=500,4500 protocol=udp
add action=accept chain=input comment="defconf: accept ipsec AH" protocol=ipsec-ah
add action=accept chain=input comment="defconf: accept ipsec ESP" protocol=ipsec-esp
add action=accept chain=input comment="defconf: accept all that matches ipsec policy" \
ipsec-policy=in,ipsec
add action=drop chain=input comment="defconf: drop everything else not coming from LAN" \
in-interface-list=!LAN
add action=accept chain=forward comment="defconf: accept established,related,untracked" \
connection-state=established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" connection-state=invalid
add action=drop chain=forward comment="defconf: drop packets with bad src ipv6" \
src-address-list=bad_ipv6
add action=drop chain=forward comment="defconf: drop packets with bad dst ipv6" \
dst-address-list=bad_ipv6
add action=drop chain=forward comment="defconf: rfc4890 drop hop-limit=1" hop-limit=equal:1 \
protocol=icmpv6
add action=accept chain=forward comment="defconf: accept ICMPv6" protocol=icmpv6
add action=accept chain=forward comment="defconf: accept HIP" protocol=139
add action=accept chain=forward comment="defconf: accept IKE" dst-port=500,4500 protocol=udp
add action=accept chain=forward comment="defconf: accept ipsec AH" protocol=ipsec-ah
add action=accept chain=forward comment="defconf: accept ipsec ESP" protocol=ipsec-esp
add action=accept chain=forward comment="defconf: accept all that matches ipsec policy" \
ipsec-policy=in,ipsec
add action=drop chain=forward comment="defconf: drop everything else not coming from LAN" \
in-interface-list=!LAN
/system clock
set time-zone-name=Europe/Vienna
/tool mac-server
set allowed-interface-list=LAN
/tool mac-server mac-winbox
set allowed-interface-list=LAN
  • MIKROTIK, Mikrotik Backups, Mikrotik Netwatch, Winbox
  • 2 utilizatori au considerat informaţia utilă
Răspunsul a fost util?

Related Articles

Mikrotik Email

Email setup and configuration. Mikrotik Tools / Email Sending email through mikrotik...

Mikrotik Netwatch

Mikrotik Netwatch.. An easier explanation and example. Say you are an IT provider of sorts...

Mikrotik Backups Via Email

Mikrotik Backup via email.. Sending yourself a Mikrotik Backup file via email is...

Mikrotik Winbox crashes after opening

Mikrotik Winbox opens then crashes, may show CPE in quickbox then close, you may be...

Mikrotik IKE2 NORD VPN Setup

MikroTik IKEv2 setup with NordVPN Share this answer These instructions are based on a tutorial...